Item: 4014-13 Derails - Hinged
Weld Base Plate to 3 steel ties to provide foundation for bolting one-way or two-way hinged derail. No alteration of track is necessary. Base plate is designed to accommodate Pandrol clips. (Derail is not included with base plate, order separately.)
IMPORTANT INFORMATION ABOUT ALDON® HINGED DERAILS
Derails are emergency car stopping devices to prevent unauthorized movement of a locomotive or railcar. the derail lifts the flange of the car wheel and drops it clear of the rail. Simultaneously, the wheel opposite the derail is guided off the rail. Once the car wheel leaves the rail, forward movement is greatly impeded.
Effective derailing depends on:
- Proper derail size and installation
- Normal switching speed travel
- Flat track -- no grades.
Fully exposed track -- derailed wheels need to sink into the ties and ballast.- Ample room for derailment. A derailed car may travel a car length or more before stopping, depending on speed.
- Installation in sound track.
- In curved track, install on outside rail.
Mandatory Use Regulations:
FRA Subpart E - Derails
Derail Minimum Requirements
OSHA 1910.261(c)
Pulp and paper cars
OSHA 1910.176(f)
All freight cars
DOT Pamphlet #34
Safe loading/unloading of tank cars
FRA Chapter 11, #218.25 Workmen on track
4014-01 Derails - Hinged
DR-1 One Way Left Throw One-Way Hinged FOR FREIGHT CARS and LOCOMOTIVES For rails 60 lbs. and heavier. Derails are sized to fit a specific rail height, including thickness of tie plate. Weight 156 lbs
4014-02 Derails - Hinged
DR-1 One Way Right Throw One-Way Hinged FOR FREIGHT CARS and LOCOMOTIVES For rails 60 lbs. and heavier. Derails are sized to fit a specific rail height, including thickness of tie plate. Weight 156 lbs.
4014-03 Derails - Hinged
DR-2 Two Way Derail FOR FREIGHT CARS & ROAD-RAIL VEHICLES. Blue derail sign and holder are included with the derail. Six screw spikes are provided for proper anchoring to ties. Height of derail above rail: 3" Weight 165lbs
