Purchase All Railyard Safety Products Online
D2106SLS6S6SB Swivel Joints - Style 10
6” D2000 Style 10 Stainless Steel Swivel Joint with Standard Bearings. Grease Type: Standard - Dura-Lith Inlet Connection: Stainless Steel 300# Flange Outlet Connection: Stainless Steel 300# Flange Buna Seals.
D2106SLS6S6SV Swivel Joints - Style 10
6” D2000 Style 10 Stainless Steel Swivel Joint with Standard Bearings. Grease Type: Standard - Dura-Lith Inlet Connection: Stainless Steel 300# Flange Outlet Connection: Stainless Steel 300# Flange Viton Seals.
D2204C1C22CSV Swivel Joints - Style 20
4" D2000, Style 20, carbon steel, ANSI B16.5 150# flanged ends, H block Viton seal
4013-08 Truck Trailer Stabilizing Jacks
Telescope Jack - Height Range: 39" - 51" - Load Bearing Capacity: 25,000lbs - Top: 7" - Base: 12" - Weight 35lbs Raise and lower in 1-1/2" increments with 2-pin locking handle NOTE: Use wood blocking to fill up daylight between top of jack and trailer
4013-05 Truck Trailer Stabilizing Jacks
Standard Jack - without wheels - Height Range: 43-1/2" - 50-1/2" - Load Bearing Capacity: 25,000lbs - Top: 5" - Base: 12" - Weight 44lbs Screw Diameter: 1-1/2" No Zerk Fitting Top plate does not tilt
4115-135 Derails - Accessories
Solar Powered flashing blue light. Shock-proof and weather-tight. Gravity switch activates light when sign holder is at 45 degree angle or greater. Brilliant 6-LED light visible for over a mile. Mounting bracket provided.
4016-20 Crane Stops
Non-Slide Wheel Contact Crane Stop Use wherever below rail head clearance is minimal and where a non-sliding crane stop is needed. Wedge dogs lock wedge to rail head and do not interfere with hook bolts. On impact, stops slide only marginally or not at al
4016-06 Rail Car Stops
Uses the cushioning capacity of the tie and a wheel-bump feature to lift the wheel slightly off the rail to absorb momentum of moving car. Recommended for industrial spur tracks which do not require a bumping post but which need more protection.
4016-21 Crane Stops
Non-Slide Bumper Crane Stop Wedge stands 15 inches above top of rail. Underside of crane bumper should not be more than 12" above top of rail. Specify rail size and section.
4016-08 Crane Stops
Cushion-Slide Bumper Contact Crane Stop Wedge stands 15” above top of rail. All standard crane bumper heights can be accommodated. Cinch plates are made to fit a specific rail size and section.
4016-07 Crane Stops
Cushion Slide Wheel Crane Stops Wedges made to fit a specific wheel diameter. Wedges meet OSHA regulation that half the wheel diameter is covered. Cinch plates are made for a specific rail size and section.
4014-31 Derails - Accessories
Ready to use shim plates, 1/4" thick, ensure a proper height adjustment and a secure mounting of hinged derails with manual lift sign holders.
4014-32 Derails - Accessories
Ready to use shim plates, 1/4" thick, ensure a proper height adjustment and a secure mounting of hinged derails with manual lift sign holders.
4014-18 Derails - Hinged
2-Way Hinged Derail (for Locomotive) with manual sign holder suitable for 6-axle and 4-axle locomotives and all freight cars. Low-angle deflection bar accommodates longer wheel base of 6-axle locomotives. Allow ample space alongside the track for derail
4016-13 Rail Skids
Locomotive Chocking Skid (Exposed Rail) At 16 lbs and 17½ " long, this model skid is handy for chocking locomotive on flat track. The low-profile (4" tall) handle clears any wheel frame or brake shoe obstruction.
4013-13 Truck Trailer Stabilizing Jacks
Aldon® Adjustable Height Trailer Stabilizer Steel Adjustable height 42” - 46” 75,000 lbs. proven load capacity
Safety Products
BEST SELLER
D2506CLC3C3SB Swivel Joints - Style 50
6” D2000 Style 50 Carbon Steel Swivel Joint with Standard Bearings. Grease Type: Standard - Dura-Lith Inlet Connection: Carbon Steel FNPT Outlet Connection: Carbon Steel FNPT Buna Seals.
4016-21 Crane Stops
Non-Slide Bumper Crane Stop Wedge stands 15 inches above top of rail. Underside of crane bumper should not be more than 12" above top of rail. Specify rail size and section.